电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。     

悬浮浇注对铝铜合金组织遗传性的影响

采用悬浮浇注法研究了ＺＬ２０１合金的遗传现象及其组织性能的影响，通过分析试件的凝固特性，对合金的组织遗传机理进行了初步探讨，结果表明：悬浮剂的中入使合金的凝固时间缩短，凝固速度增加，促进了合金结晶组织的细化，当加入３％ｗｔ悬浮剂合金组织的有明显改善且力学性能σｂ和δ分别提高了８．８％和２３．１％，证明熔体中的弥散质点是组织遗传“基因”的观点。     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

自适应天线抗干扰性能研究

分析了适用于雷达抗干扰的一些自适应天线波束形成算法,将子空间正交投影算法应用于雷达抗干扰,针对子空间分解过程中特征向量不能完全正交的问题,采用约束化子空间分解算法,来保证子空间特征向量的正交性.最后通过仿真证明:子空间跟踪算法相对于传统的一些自适应算法具有更强的抗干扰性能.     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

非静止轨道通信卫星星座间同频干扰概率分析

随着全球非静止轨道（non-geostationary orbit,NGSO）通信星座系统的大规模部署及应用,使用相同频率的星座系统之间存在着相互干扰的风险。NGSO系统间同频干扰概率的有效评估方法及合理评价指标是评估干扰风险及设计规避策略的基础,通过分析星座构型与地面站可视空域内卫星出现概率分布特性的关系,利用地面站接收端干扰噪声比保护阈值,建立了概率评估参数指标,并以OneWeb系统、O3b系统以及SpaceX系统为例,分析了全球范围地面站不同NGSO系统间发生有害干扰的概率分布特性。当系统间卫星出现概率分布趋同,会使有害干扰概率增加;反之,不同NGSO系统卫星在可视空域出现概率分布的较大差异会有效降低有害干扰概率。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.     

LC4CS铝合金裂纹尖端腐蚀行为的实验研究

ＬＣ４ＣＳ铝合金是极为重要的航空材料，为评定其使用年限，在测定铝合金腐蚀疲劳裂纹的扩展速率时，需要弄清纹尖端金属的腐蚀电化学行为。在腐蚀环境中裂纹尖端由于不断露新鲜金属，因而将具有类似于双金属腐蚀时的电偶效应。为此，文中设计了一种新颖的缺口试样，再现裂纹尖端的真实状态，并在３．５％ＮａＣｌ溶液测定剪切口断裂后，裸露出的新鲜金属在耦合前后腐蚀电位的变化，以及裸露面积，ＮａＣｌ溶液的ｐＨ值与电偶电流的     

月面高温下推力器可靠性试验

嫦娥五号着陆上升组合体落月后将经历月昼强红外辐射环境，由于推力器喷管导热影响，使推进剂管路与电磁阀面临高温环境，推进系统存在管路内氧化剂汽化和推力器性能下降甚至无法正常工作的问题，影响上升器月面起飞正常姿态控制。为了研究高温下推力器的工作性能，进行了高温下氟塑料阀芯与氧化剂相容性调研，提出了电磁阀和推力器可靠性增长及可靠性验证试验方法，分析了温度与电磁阀阀芯行程的关系，获取了高温环境下推力器的稳态及脉冲工作性能，在小子样条件下评估了推力器可靠性置信下限及月面起飞上升推进系统可靠度，通过月面高温排气及月面起飞上升姿态控制对研究结果进行了航天器在轨飞行验证，圆满完成了上升器月面起飞上升任务。所提出的研究方法及思路具有很好的工程适用性。